| Analogue Actuator Module, 4-fold |
AAM/S4.1 |
 |
To enlarge the Analogue Actuator AA/S 4.1 by four analogue outputs. These outputs are software-parameterized for voltage or current signals. The 24 V AC power supply can can be carried out by the Analogue Actuator AA/S 4.1. |
Product Details |
| Analogue Actuator, 4-fold |
AA/S4.1 |
 |
Has 4 analogue outputs and converts EIB/KNX-telegrams into voltage or current signals. With the Analogue Actuator Module AAM/S the number of outputs can be increased to 8. Needs external 24 V AC power supply (e.g. TS 25/12-24 C). |
Product Details |
| Binary Input Device, 8 inputs for 12 ... 230 V AC/DC |
N263E |
 |
Siemens Binary Input Device N263E/01, 8 inputs for 12 ... 230 V AC/DC |
Product Details |
| DMB 2 KNX KNX (EIB) Dimmer |
4910222 |
 |
Dimming performance extension twofold, dimming booster |
Product Details |
| DME 2 KNX KNX (EIB) Dimmer |
4910221 |
 |
KNX universal dimming actuator twofold, extension device |
Product Details |
| DMG 2 KNX KNX (EIB) Dimmer |
4910220 |
 |
KNX universal dimming actuator twofold, basic device |
Product Details |
| Light Controller, 2-fold, 1-10V, MDRC |
LR/S2.16.1 |
 |
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 – 10 V control input). When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control. |
Product Details |
| N524 |
5WG1524-1AB01 |
 |
Siemens Blind Actuator ER N524, 1A, 4 x 6 ... 24V DC |
Product Details |
| N567/11 |
5WG1567-1AB11 |
 |
N 567/11, 8-fold
The N 567/11 switch actuator has 8 relais contact outputs,connection per channel for 230 V AC, 8A resistive load. |
Product Details |
| RME 4 S KNX KNX (EIB) Switch actuators |
4910205 |
 |
KNX switch actuator extension device fourfold |
Product Details |
| RMG 4 S KNX KNX (EIB) Switch actuators |
4910204 |
 |
KNX switch actuator fourfold, basic device |
Product Details |
| Switch Actuator, 2-fold, 10A, MDRC |
SA/S2.10.1 |
 |
Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669. |
Product Details |
| Switch Actuator, 8-fold, 10A, MDRC |
SA/S8.10.1 |
 |
Uses potential free contacts to switch 8 independent electrical loads via KNX. Manual and visual operation. The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669. |
Product Details |
| Switch Actuator, 8fold, 16A, C-Load, Current Detection, MDRC |
SA/S8.16.5S |
 |
Uses potential free contacts to switch 8 independent electrical loads via KNX. Load current detection, manual and visual operation. The 16AX-AC3 (C-load) device is especially suited for loads with high surge currents e.g. flourescent lighting. |
Product Details |
| Universal Dim Actuator, 2-fold, 300 VA, MDRC |
UD/S2.300.1 |
 |
For switching and dimming incandescent lamps, 230 V halogen lamps or low-voltage halogen lamps powered by wound or electronic transformers. Automatic load detection. Full output power up to 45 °C ambient temperature. |
Product Details |
| UNIVERSAL DIMMER 3X300W |
HAGER TXA213 |
 |
TXA213 Universal dimmer 3
channels 300W
3 modes possible :
- 3 channels 3 x 300W
- 2 channels 600W / 300W
- 1 channel 900W |
Product Details |
| Universal I/O Concentrator, 32-fold, MDRC |
UK/S32.2 |
 |
To connect push buttons or signal lamps to the ABB i-bus®, e.g., in an operating/display tableau. It has 32 channels which can be freely parameterised as inputs/outputs using the ETS software. Requires an external 12/24 V DC auxiliary power supply. |
Product Details |